-
Analog MUX
This analog multiplexer allows input signals in a multi-channel structure to selectively transfer into a processing unit. It provides a channel-control function that is able to readout the selected channels sequentially when used without additional logic for channel selection.
It is designed in 130nm BCDMOS technology..
KU335H0831 | 2016-10-13
-
Analog Mux
The Analog multiplexer is digitally controlled analog switches implemented in the 0.13nm CMOS.
It consists of 72 channel multiplexers arranged with logic level conversion for independent of the control signals.
The Analog mux uses a Level shifter to change signal from processor.This changed signal will become input ..
KC193H0751 | 2016-03-21
-
12v Analog Switch
This IP is a switch intended for the transmission or multiplexing of analog or digital signals, and exhibits a much lower on-state resistance.
In addition, the on-state resistance is relatively constant over the full signal-input range. The circuit configuration eliminates the variation of the switch-transistor thres..
KC193H0735 | 2016-02-22
-
A 2.5Gbps 2:1 Multiplexer Design Using Inductive Peaking in 0.18um CMOS
Data multiplexer(MUX) are one of the key blocks in high-speed data for transmitter of optical fiber communication system. A 2.5Gbps 2:1 multiplexer(MUX) IC using 0.18㎛ CMOS was designed and fabricated. In general, inductive peaking technology was used to improve the frequency performance. On-chip micro spiral inducto..
KU085H0158 | 2011-03-03
-
A 6Gbps 1:2 DEMUX Design Using Micro Stacked Spiral inductor in 0.18um CMOS
A demultiplexer (DEMUX) is one of the key blocks in high-speed data for Serializer and Deserializer (Serdes) system of optical fiber communication system. A 6 Gbps 1:2 demultiplexer (DEMUX) IC using 0.18 μm CMOS was designed and fabricated. For high speed performance current mode logic (CML) flip-flop was used and i..
KU085H0157 | 2011-03-03