-
CAN FD Controller
The Controller Area Network with Flexible Data-Rate (CAN FD) controller implements the CAN FD specifications as defined in the Bosch specification.
KU359S0915 | 2017-07-11
-
CAN Controller
CAN (controller area network) is a standard real-time serial communication protocol, and it was developed to control various in-vehicle electronic modules. CAN controller was designed in Verilog HDL, based on CAN ver. 2.0A and 2.0B.
KU359S0890 | 2017-05-12
-
LIN Controller
LIN is a standard low-speed serial communication protocol, and it was developed as an efficient sub-bus for automotive electronic modules. LIN controller was implemented in Verilog HDL, based on LIN ver. 2.2A.
KU359S0889 | 2017-05-12
-
Time out oscillator in FlexRay transceiver
1) The designed IP is the time out oscillator in FlexRay transceiver. The designed IP consists of bias current circuit, LDO, level shifter, oscillator and timeout circuit. Total bias current is 100uA and operation up to supply voltages of 3.3V. the time out oscillator circuit detects an error signal when the BP or BM s..
KU423H0883 | 2017-04-20
-
FlexRay Communication Controller
Nowadays, the demands of controller automobiles application units have been rapidly increasingly, due of the needs in improving the safety of drivers. Moreover, due to the latest development of mechanical, communication and electronic control units (ECUs). Because of this, a problem arises to compensate equally its dem..
KU423S0841 | 2016-12-21